IN BRIEF
A DPIN — a Designated Partner Identification Number — was the eight-digit number the MCA once issued to designated partners of a limited liability partnership under Section 7(6) of the LLP Act, 2008. No new DPINs have been issued since 9 July 2011, when the MCA merged DPIN into the Director Identification Number (DIN). A designated partner today holds a DIN, which comes through FiLLiP or Form DIR-3.
A DPIN is a Designated Partner Identification Number — the eight-digit number the MCA issued to designated partners of an LLP. No new DPINs have been issued since 9 July 2011. The number was merged into the Director Identification Number (DIN), so a designated partner today holds a DIN, obtained through FiLLiP or Form DIR-3 for an existing LLP.
If you landed here because a form, a CA or a website told you to “apply for a DPIN”, here is the honest position: there is no DPIN form any more. There has not been one for fifteen years. What you need is a DIN, and the route to it depends entirely on whether your LLP already exists. Get that wrong and you will pay for a number nobody can issue, file the wrong form, and lose weeks. This guide gives you the corrected position, the two routes, the fees, and the dates that actually matter.
What a DPIN was
A DPIN was the MCA’s identification number for a designated partner — the partner who signs the LLP’s filings, answers the Registrar, and carries the penalties. Section 7(6) of the LLP Act, 2008 says every designated partner shall obtain a Designated Partner Identification Number from the Central Government. It was an eight-digit number, valid for life, and it did the same job for LLPs that a DIN did for company directors.
Two numbers for one person was always a duplication, and the MCA knew it. So in July 2011 the Ministry integrated the two: one identification number for both purposes. From 9 July 2011 no fresh DPIN was issued at all. Anyone who wanted to become a designated partner had to obtain a DIN instead, and a DIN already held worked as a DPIN. If a person somehow held both, the DPIN stood cancelled and the DIN served for everything. That is still the law. The word DPIN survives in Section 7(6) and in search boxes. It does not survive as a number you can apply for.
The short history, because the dates explain the confusion
Three dates explain why so many guides contradict each other.
2011 — the merger. MCA notification of 5 July 2011, effective 9 July 2011: DIN and DPIN integrated into a single number. No new DPINs from that day.
2018 — the DIR-3 restoration. In January 2018 the MCA suspended DIN allotment while it rebuilt the forms, and LLP registrations stalled with it. The LLP (Amendment) Rules, 2018 then amended Rule 10 of the LLP Rules, 2009: a person intending to be appointed as a designated partner of an existing LLP applies electronically in Form DIR-3, and that DIN is sufficient for the appointment. New LLPs, meanwhile, moved to FiLLiP, which allots the DIN inside the incorporation itself. Some guides call 2018 the merger year. It was not. It was the year the route for existing LLPs was fixed.
2021 and 2026 — the two quiet changes. The LLP (Amendment) Act, 2021 rewrote the residency test and the penalties, and the Companies (Appointment and Qualification of Directors) Amendment Rules, 2025 replaced annual DIR-3 KYC with a three-year cycle from 31 March 2026. Both are covered below, and both are the points on which older guides are now wrong.
DPIN vs DIN: the difference, in one table
| DPIN (old) | DIN (now) | |
|---|---|---|
| Full form | Designated Partner Identification Number | Director Identification Number |
| Used for | Designated partners in LLPs | Company directors and LLP designated partners |
| Governing law | LLP Act, 2008, Section 7(6) | Companies Act, 2013, Sections 153–159 (applied to LLPs by Section 7(6)) |
| Status | Merged into DIN in 2011; no new DPINs issued | In use; one number per person for life |
| How you get it | There is no route — the form no longer exists | FiLLiP at incorporation, or Form DIR-3 for an existing LLP |
| Keeping it active | — | DIR-3 KYC Web once every three financial years, by 30 June |
One person, one number. If you already hold a DIN as a company director, you use the same number as a designated partner. You do not apply again, and you certainly do not hold a DIN and a DPIN — a guide that tells you that you can hold both is quoting the position from before 2011.
Who needs a DIN as a designated partner?
Every designated partner needs one. An ordinary partner who is not a designated partner needs nothing at all — no DIN, no DPIN, no form. That distinction is the first thing to get right, because the two roles are often confused in LLP agreements.
Section 7(1) of the LLP Act sets the frame. Every LLP must have at least two designated partners who are individuals, and at least one of them must be resident in India. Where all the partners are bodies corporate, or a mix of individuals and bodies corporate, at least two individuals — partners of the LLP or nominees of the bodies corporate — must act as designated partners.
Resident in India has a precise meaning here, and it changed. Since the LLP (Amendment) Act, 2021 took effect on 1 April 2022, a resident is a person who has stayed in India for at least 120 days during the financial year. Before that amendment the test was 182 days in the immediately preceding year. Guides that still quote 182 days are reproducing the pre-2021 Act. If your LLP’s only resident designated partner spent 130 days in India this year, the LLP is compliant. Under the old test it would not have been.
Who can be one? An individual, aged 18 or above, who is not of unsound mind as declared by a court and not an insolvent. Indian nationals apply with a PAN. Foreign nationals apply with a passport — notarised and apostilled, or consularised — and a foreign national can absolutely be a designated partner. The only hard rule is the residency one: at least one of the two must meet the 120-day test.
How do you get one? It depends on your situation
| Your situation | How the DIN comes |
|---|---|
| Forming a new LLP, and you have no DIN | Applied for inside the FiLLiP incorporation form; issued with the Certificate of Incorporation |
| Joining an existing LLP as a designated partner, and you have no DIN | Apply in Form DIR-3 on the MCA portal; then give consent in Form 9; the LLP files Form 4 within 30 days |
| You already hold a DIN | Use it. No new application, in either situation |
Think of the DIN as your PAN for the MCA world — one number, issued once, that follows you from company to LLP to company. A DPIN was a second PAN for the same person. The government merged the two in 2011, and nobody has needed the second one since.
Route 1: forming a new LLP — the DIN comes with FiLLiP
When you are registering an LLP, the designated partners’ identification numbers are handled inside Form FiLLiP itself. In the form you tick “Whether DPIN is to be allotted” for each proposed designated partner who does not already hold a DIN, and attach their identity and address proof. Every designated partner signs FiLLiP with a Class 3 DSC. On approval, the DIN is issued along with the Certificate of Incorporation. There is no separate DIN fee inside FiLLiP, and no separate DIR-3 application to file.
That is the whole route. If someone offers to get you a DPIN before the incorporation starts, they are selling you a step that does not exist.
Route 2: joining an existing LLP — DIR-3, then Form 9, then Form 4
When a person is appointed as a designated partner of an LLP that already exists, the sequence is fixed by Rule 10 of the LLP Rules, 2009, and it runs in this order.
First, the DIN. The incoming partner applies electronically in Form DIR-3 under the Companies (Appointment and Qualification of Directors) Rules, 2014. The form needs a DSC, identity proof (PAN for Indian nationals, passport for foreign nationals), address proof not older than two months, a photograph, and certification by a practising professional — a Company Secretary, Chartered Accountant or Cost Accountant. The government fee is ₹500, paid online. Allotment usually takes one to two working days once the details are clean. The single most common reason for a query is a mismatch: the name or date of birth on the PAN does not match the passport or the address proof. Check every document against the others before you file.
Second, the consent. Section 7(3) says nobody becomes a designated partner without giving prior consent to the LLP, and the consent is given in Form 9. The DIN goes to the LLP with that consent.
Third, the LLP reports it. The LLP files Form 4 — the notice of appointment of a designated partner — within 30 days of the appointment, under Section 7(4). If the LLP agreement names its designated partners or the new partner’s contribution and profit share change anything in it, the LLP also files Form 3 within 30 days under Section 23(2). The Form 4 government fee is ₹50 for small LLPs and ₹150 for other LLPs.
One claim you will see in a recent guide deserves a straight answer: that Form 4 itself “includes the DIN application”. It does not. The DIN comes first, through DIR-3, because Form 4 carries the DIN in it. Rule 10 says so in terms, and every other current guide agrees. File DIR-3, get the number, then file Form 4.
A worked example: two founders, then one NRI partner
Asha and Rohan decide to form an LLP. Asha is already a director in a private limited company, so she holds a DIN — she uses the same number as a designated partner and applies for nothing. Rohan has no DIN, so his is applied for inside FiLLiP and arrives with the Certificate of Incorporation. Both sign FiLLiP with Class 3 DSCs. The LLP is running.
Six months later they appoint Meera, an NRI living in Dubai, as a third designated partner. Meera has no DIN. She applies in Form DIR-3 with her passport, an address proof from Dubai, notarised and apostilled, and a DSC, pays ₹500, and gets her DIN. She gives her consent in Form 9. The LLP files Form 4 within 30 days of her appointment. The residency rule is still satisfied — Asha and Rohan both meet the 120-day test, so Meera’s appointment does not disturb it. If Asha and Rohan had both been non-resident, the appointment could not have gone ahead until one resident designated partner was in place.
This is a worked example with stated assumptions, not a real LLP. But the sequence is the sequence: DIN first, consent second, Form 4 within 30 days.
Keeping your DIN active: DIR-3 KYC, once every three years
A DIN is valid for life, but only while its KYC is up to date. The rule changed on 31 March 2026, and this is the point on which most guides you will find are now wrong. Until then, every DIN holder filed DIR-3 KYC every year by 30 September. Under the Companies (Appointment and Qualification of Directors) Amendment Rules, 2025, notified as G.S.R. 943(E) on 31 December 2025, the annual filing was replaced with a filing once every three consecutive financial years, by 30 June, on a single merged Form DIR-3 KYC Web. If you filed KYC for FY 2025-26, your next filing falls between April and June 2028. A DIN allotted during FY 2025-26 is first due between April and June 2029. The three-year cycle runs from the financial year of allotment, not from the date you last filed.
Miss the date and the MCA deactivates the DIN. A deactivated DIN cannot sign any MCA form, and it will block a Form 4 or an annual filing until it is restored — file the KYC on DIR-3 KYC Web and pay the ₹5,000 reactivation fee. Filing on time costs nothing. A change in your mobile number, email or residential address must still be reported within 30 days, on the same form; that update does not restart the three-year clock. The new once-in-three-years DIR-3 KYC rule is covered in detail in our earlier guide, and the same rule covers designated partners, because they hold the same DIN as company directors.
Keeping your details current
Two different updates, two different forms. If your DIN particulars change — name, address, mobile, email — the change goes through Form DIR-6. If your position in the LLP changes — you join, leave, change your name or address as a partner — tell the LLP within 15 days, and the LLP files Form 4 with the Registrar within 30 days, under Section 25. When a designated partner resigns or is removed, the LLP files Form 4 within 30 days and fills the vacancy within 30 days, so the LLP is never left with fewer than two designated partners. The DIN stays with the individual when they leave; it is never surrendered with the role. If the LLP itself is closing rather than replacing a partner, that is a different process — our guide to winding up an LLP covers it.
What happens if the LLP gets the designated-partner rules wrong?
The LLP Act does not treat these as paperwork slips. Section 10, as rewritten by the 2021 amendment, sets penalties that grow daily:
| Contravention | Penalty | Cap |
|---|---|---|
| Fewer than two designated partners, or no resident designated partner (Section 7(1)) | ₹10,000, plus ₹100 a day while it continues | ₹1 lakh for the LLP; ₹50,000 for every partner |
| Designated-partner particulars not filed within 30 days (Section 7(4)) | ₹5,000, plus ₹100 a day while it continues | ₹50,000 for the LLP; ₹25,000 for every designated partner |
| Vacancy not filled in 30 days, or eligibility rules breached (Section 7(5) / Section 9) | ₹10,000, plus ₹100 a day while it continues | ₹1 lakh for the LLP; ₹50,000 for every partner |
On top of the penalties, the MCA charges additional fees for late LLP filings on a graded scale that rises with the delay — so a late Form 4 costs the fee multiple as well as the Section 10 penalty. If you want the exact figure for your delay, run it through our compliance fee calculator before you file.
Five mistakes that cost people
Paying for a DPIN. There is no DPIN to buy. If an agent charges you for one, you are paying for a DIR-3 application at most — and inside FiLLiP there is no separate DIN fee at all.
Filing DIR-3 for a new LLP. DIR-3 is for a designated partner joining an existing LLP. For a new LLP the DIN comes inside FiLLiP. Filing DIR-3 first wastes the fee and the week.
Diary-keeping the old KYC. “Every year by 30 September” died on 31 March 2026. Diary the three-year date — April to June 2028 if you filed for FY 2025-26 — and the 30-day rule for changes of mobile, email or address.
Using the 182-day residency test. The test is 120 days in the financial year since 1 April 2022. An LLP that turns away a partner who spent 130 days in India is applying a rule that no longer exists.
Appointing someone with a deactivated DIN. Check the DIN’s status on the MCA portal before you file Form 4. A deactivated DIN blocks the filing, and the 30-day clock keeps running while you fix it.
Should you do this yourself?
The FiLLiP route is straightforward if the documents are clean and the names match everywhere. The DIR-3 route is straightforward too, until it is not — a PAN-passport mismatch, a DSC that is not registered on the portal, a foreign national’s documents that were notarised but not apostilled. Those are the three failures I see most, and each one costs a week, not a day. If you are adding a designated partner to an existing LLP, get the DIN checked, the consent signed and the Form 4 filed inside the 30 days — the penalty table above is the price of letting it drift. And if your situation involves a foreign partner, read our guide to LLP registration for NRIs and foreign nationals before you start, because the FEMA side of the appointment is a separate question from the DIN.
One number, issued once, used everywhere. That is the whole system now. The DPIN is history — useful to understand, impossible to apply for, and no reason to pay for.
Frequently asked questions
Can I still apply for a DPIN?
No. No new DPINs have been issued since 9 July 2011, when the MCA merged DPIN into DIN. There is no DPIN form on the MCA portal. Apply for a DIN instead — through FiLLiP if you are forming a new LLP, or Form DIR-3 if you are joining an existing one.
I already have a DIN as a company director. Do I need a DPIN too?
No. The same DIN serves as your designated-partner number. You do not apply again, and you cannot hold a DIN and a DPIN at the same time — duplicate DPINs were cancelled when the two numbers were merged.
How long does it take to get a DIN as a designated partner?
Inside FiLLiP it arrives with the Certificate of Incorporation, usually within about a week of filing. Through Form DIR-3 it usually takes one to two working days after submission, if the documents are consistent. A name or date-of-birth mismatch between PAN and passport is the usual delay.
Can a foreign national be a designated partner?
Yes, with a passport and address proof, notarised and apostilled or consularised. The only restriction is that at least one designated partner must be resident in India — someone who has stayed in India for at least 120 days during the financial year.
What happens if a designated partner resigns?
The LLP files Form 4 within 30 days and fills the vacancy within 30 days, so there are always at least two designated partners, one of them resident in India. The DIN stays with the person who leaves; it is never surrendered with the role.
Comments
No comments yet — ask the first question below.
Join the discussion
Questions go straight to our expert desk. Comments appear after a quick review — no spam, no noise.